Blunet BL-32960M, Installation & User Manual

Page: 143 / 224

143
At division screen, it can change screen location.
If 3channel image moves to 6ch, drag 3ch image and drop on 6ch location so as to exchange between 3ch
and 6ch image.
17.3.2. Change to Resolution
As above picture, click the menu for the menu of resolution. And select out of Auto, TINIY, QCIF, CIF,
HALF, FULL, and then relevant resolution is applied to all channels.
<Note>
In case of MPEG product, frame rate change and reolution change menu is not shown characterically.
<Note>
When resolution changes, video size is not changed. The change of video size means the change from
small size to big size based on selection of division screen.
17.3.3. Change of Frame Rate
As above picture, click the menu on top of page for the menu of Transmission speed.
30fps, 15fps, 10fps, 8fps, 5fps, 4fps, 3fps, 2fps, 1fps can be selected. When it selects, it is applied to all
channels. Default is 5fps.
<Note>