Blue Box 10
2.2 LIFTING AND SITE HANDLING
Avoid sudden movements and jolts when unloading and positioning the unit. Internal handling procedures
must be conducted with care. The unit must be lifted using spreader bars. Do not exert leverage on the
components of the machine. The unit must be lifted by inserting steel tubes through the lifting attachments
shown by the relative labels (yellow arrow). The unit must be lifted by harnessing it as shown in figure 1: use
ropes or straps of sufficient length. The width of the spreader bars must not be less than that of unit.
1. FIELD OF APPLICATION
The equipment is designed for cooling (chiller only versions) or cooling/heating (heat pump versions) water, which
is usually applied to air conditioning or refrigeration systems. Units must be used exclusively within the operating
limits specified in Section 4.
1.1 INTRODUCTION
- When installing or servicing the unit, it is necessary to strictly follow the rules described in this manual, to
conform to all the items detailed on the unit labels and take any necessary precaution.
- Pressure in refrigerant circuits and danger from electrical shock can be hazardous when installing or servicing the
unit.
Any work on the unit must be carried out only by trained personnel.
Attention: before repairing or servicing the unit, ensure that the electrical
supply is disconnected.
The warranty will be invalid if the rules described in this manual are not observed and if any modifications are
made to the unit without prior authorisation of the manufacturer.
2. INSPECTION, TRANSPORT, SITE HANDLING
2.1 INSPECTION
After receiving the unit, immediately check its integrity. The unit will have left the factory in perfect condition
therefore on receiving the unit any damage must be verbally described to the carrier and recorded on the Delivery
Note which must be signed by both parties. Blue Box or their Agent must be informed, as soon as possible, of the
extent of the damage.
The Customer should prepare a written statement and photographic evidence regarding any severe damage.
Summary of Contents for KAPPA V SR
