Blue Box 13
MECHANICAL HAZARDS
Operating mode
Analysed risk or hazard
Solution adopted
Normal operating regime
Maintenance
Stability
Because of their intrinsic characteristics, the
units are not associated with problems of
possible falling or tipping while in operation.
Carefully read the items described in this
manual concerning the methods of
positioning the unit.
Handling during transport
and installation.
Stability
The unit's base frame has specific lifting
holes; the positions of which are marked
with yellow decals. Following this procedure
will eliminate the risk of the unit tipping.
Carefully read the items descriptions in this
manual concerning the methods of handling
the unit.
Normal operating regime
Maintenance
Pipeline bursts.
Pipes are rigidly anchored to reduce the
degree of vibration.
Normal operating regime
Surfaces, sharp corners and
edges.
The machine is designed and built in such a
way as to minimise the presence of sharp
corners and edges as far as possible.
Maintenance
Surfaces, sharp corners and
edges.
In the interior parts of the unit it is not
possible to totally eliminate risks from the
presence of surfaces, sharp corners and
edges. The operating, installation, and
maintenance manual specifies that
maintenance operations should be carried
out exclusively by qualified personnel, and
provides indications of the protective
equipment to be used.
Normal operating regime
Cutting or severing.
The moving parts of the unit are located in
clearly defined areas. Specifically, the fans
are enclosed in an inaccessible compartment
and are equipped with an upper protection
grille to UNI EN 294. All the protections
supplied to limit and enclose the fan
compartments cannot be removed without
the use of special tools.
Maintenance
Cutting or severing.
The moving parts of the unit are located in
clearly defined areas. Specifically, the fans
are enclosed in an inaccessible compartment
and are equipped with an upper protective
grille to UNI EN 294.
Normal operating regime
Cutting or severing.
All units are supplied as standard with
specific protection grilles designed to protect
against accidental contact with the finned
coils, which can cause minor cuts to the
hands.
Normal operating regime
Entanglement, dragging,
impact.
The moving parts of the unit are located in
clearly defined areas. Specifically, the fans
are enclosed in an inaccessible compartment
and they are equipped with an upper
protective grille to UNI EN 294. All the
protections supplied to limit and enclose the
fan compartments cannot be removed
without the use of special tools.
Summary of Contents for KAPPA V SR
