Blue Bird Coachworks 450 LXi, Owner'S Manual

Page: 432 / 684

450 LXi Owner Manual 5-2 Engine Messenger System
Rev. “C”
~ 5-2-21 ~
5-2.7 “Fleet Trip State Totals” Screens
5-2.7.1 The 3176B, 3176C, C-10, C11, C-12, C13, C15, C-15, C16,
and 3406E Engines only
The ECM for the Caterpillar 3176B, 3176C, C-10, C11, C-12, C13, C15, C-15, C-16 and 3406E will store the data for the
distance that is driven, the total fuel consumption number, the idle fuel that has been used, and the PTO fuel that has been
used for each state. More than one state may be selected during a “Fleet Trip Segment” up to a maximum of 50 states.
Before the data is stored, the current state must be entered into the display.
5-2.7.2 Accessing “Fleet Trip State Totals”
ECM Customer Programmable parameters determine the access to this function of the display. If the “State Information”
is programmed OFF in the ECM, the entire “Fleet Trip State Totals” column will not be shown. Press the Right arrow button
of the “LIFETIME TOTALS” screen. This will cause the display to skip the “FLEET TRIP STATE TOTALS” screen. Press the Left
arrow button of the “MAINTENANCE DATA” title screen. This will cause the display to skip the “FLEET TRIP STATE TOTALS” title
screen.
After programming the parameters in the ECM, the power must be turned OFF and the power turned ON again in order for the
display to recognize the change.
Table 10 - “Fleet Trip State Totals” Screens
Screen Parameter Description
“FLEET
TRIP STATE
TOTALS”
“Fleet Trip State
Totals Title
Screen”
The Down arrow button selects a state and the data for that state.
If “State Crossing” has not been entered, the message “NO SELECTIONS AVAILABLE”
will appear.
Press any button in order for the display to return to the “FLEET TRIP STATE TOTALS”
title screen.
From the title screen, the Left arrow button moves to the “LIFETIME TOTALS” title
screen. The Right arrow button moves to the “MAINTENANCE DATA” title screen.
−
−
−
−
“STATE 1”
“Select A State
To View State Trip
Data”
Press the Left arrow button in order to begin viewing “Fleet Trip State” information.
Press the Down arrow button in order to view other states, if other states are
available.
If more than one state is available, use the Down and Up arrow buttons to review the
list of states with recorded data.
−
−
−
“STATE 1”
“MI”
“Fleet Trip State
Distance Traveled
For Selected
State”
The display shows the distance that has been driven in the selected state for the
current “Fleet Trip”.
The selected state will be shown as “State 1”.
The Up arrow button returns to “STATE SELECTION” screen.
The “Down” arrow button will display the fuel that has been used in the selected
state.
−
−
−
−
“STATE 1”
“GAL”
“Fleet Trip State
Fuel Used For
Selected State”
The display shows the “Fuel Used” in a selected state for the current “Fleet Trip”.
The selected state will be shown as “State 1”.
The Up arrow button returns to “STATE DISTANCE TRAVELED” screen.
The Down arrow button displays “PTO Fuel Used” in the selected state.
−
−
−
−
“STATE 1”
“PTO GAL”
“Fleet Trip State
PTO Fuel Used
For Selected
State”
The display shows the “PTO Fuel Used” in a selected state for the current “Fleet Trip”.
The selected state will be shown as “State 1”.
The Up arrow button returns to “Fuel Used” for this state.
The Down arrow button displays “Idle Fuel Used” in the state that is selected.
−
−
−
−
“STATE 1”
“IDLE GAL”
“Fleet Trip State
Idle Fuel Used
For Selected
State”
The display shows the “Idle Fuel Used” in a selected state for current “Fleet Trip”.
The selected state will be shown as “State 1”.
The Up arrow button returns to the “PTO Fuel Used” for this state.
The Down arrow button returns the display to the screen that shows the state that is
selected, in this example “State 1”.
−
−
−
−