Blue Bird Coachworks 450 LXi, Owner'S Manual

Page: 290 / 684

450 LXi Owner Manual 4-16 Audio/Video Components
Rev. “C”
~ 4-16-83 ~
Tape Position and Tape Status Feature
To fi nd out the present tape position and amount of tape remaining. Tape position is displayed for VHS-C type
Cassettes, tapes under 30 minutes long, and some other tapes, but the position is not correct.
Press TAPE POS. to detect current tape position.
“DETECTING TAPE POSITION” is displayed only when a cassette is fi rst inserted, and it takes several
seconds for correct tape position to appear.
The present tape position indication and amount of tape remaining (according to tape speed) is
displayed.
Tape remaining time display may not be precise.
Press TAPE POS. to return to normal screen.
1.
•
•
•
2.
4-16.4.40 Copying Your Tapes
(Dubbing)
Connection
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as
shown.
Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN terminals on DECK. In place of Playing
VCR, you can use other equipment such as a Camcorder. Simply connect the unit’s Audio/Video outputs to DECK.
1.
2.
Playing (Source) VCR
Recording (Editing) DECK
1
Insert a pre-recorded tape. Insert a blank tape with record tab.
2
Press INPUT to set DECK Input mode to LINE for Video Input
(See “
Selecting the Input Mode ” below)
3
Press PLAY, then PAUSE/STILL immediately to enter
PLAY/PAUSE mode. Press REC, then PAUSE/STILL immediately to enter REC/
PAUSE mode.
The operation of steps 4 and 5 must be done on the playing and recording VCRs at the same time.
4
Press PLAY to start dubbing. Playing VCR starts
playback.
Press PAUSE/STILL to start dubbing. DECK starts recording.
5
Press STOP to stop dubbing. Press STOP to stop dubbing.
NOTE: This function cannot display exact amount of tape remaining for tapes 30
minutes or less, or for tapes over 120 minutes in length.