Blue Bird Coachworks 450 LXi, Owner'S Manual

Page: 430 / 684

450 LXi Owner Manual 5-2 Engine Messenger System
Rev. “C”
~ 5-2-19 ~
Table 8 - “Fleet Trip” Screens - Continued
Screen Parameter Description
“FLT - GAL - HR”
“Fleet Trip Segment Fuel
Used”
“Fleet Trip Segment
Engine Hours”
“Shows Fuel Used during the current Fleet Trip Segment. Shows Fleet
Trip Segment Engine Hours.”
“Left arrow-Driver Trip Segment Fuel Used and Engine Hours.”
“Right arrow-Lifetime Fuel Used and Engine Hours.”
“Up arrow-Fleet Trip Segment Fuel Used Per Hour.”
“Down arrow-Fleet Trip Segment PTO Fuel and PTO Time.”
−
−
−
−
−
“FLT - GAL”
“PTO” “HR”
“Fleet Trip Segment PTO
Fuel Used”
“Fleet Trip Segment PTO
Time”
“Shows PTO fuel during the current Driver Trip Segment. Displays Fleet
Trip Segment PTO time.”
“Left arrow-Driver Trip Segment PTO Time and PTO Fuel Used.”
“Right arrow-Lifetime PTO Time and PTO Fuel Used.”
“Up arrow-Fleet Fuel Used and Engine Hours during current trip.”
“Down arrow-Fleet Trip Segment Idle Fuel and Idle Time.”
−
−
−
−
−
“FLT - GAL”
“IDLE” “HR”
“Fleet Trip Segment Idle
Fuel Used”
“Fleet Trip Segment Idle
Time”
“Shows Idle Fuel Used during the current Fleet Trip Segment. Shows
Fleet Trip Segment Idle Time.”
“Left arrow-Driver Trip Segment Idle Time and Idle Fuel Used.”
“Right arrow-Lifetime Idle Time and Idle Fuel Used.”
“Up arrow-Fleet Trip Segment PTO Fuel and PTO Hours.”
“Down arrow-Fleet Percent Idle Time.”
−
−
−
−
−
“FLT - IDLE”
“%”
“Fleet Percent Idle Time”
“A value for the percent idle time of the fl eet, calculated from: (Fleet Idle
Hours divided by Total Fleet Hours).”
If the 3176B, 3176C, 3406E, C-10, C11, C-12, C13, C15, C-15 and C-16
engine ECM has been programmed to allow the Fleet Trip Reset, the
Down button displays the “Fleet Trip Reset” screen. If the Fleet Trip Reset
has not been programmed, the Down button returns to the “Fleet Trip”
title screen.
“Left arrow-Driver Percent Idle Time.”
“Right arrow-Lifetime Percent Idle Time.”
“Up arrow-Fleet Trip Segment Idle Fuel and Idle Time.”
−
−
−
−
−
“FLT RESET”
“TRIP TOTALS”
“Fleet Trip Reset”
“To Reset the Fleet Trip Segment, press the Left arrow button.”
“Up arrow-Fleet Trip Percent Idle Time.”
“Down arrow-FLEET TRIP SEGMENT title screen.”
(f the 3176B ECM, 3176C ECM, 3406E ECM, C-10 ECM, C11 ECM, C-12
ECM, C13 ECM, C15 ECM, C-15 ECM, or the C-16 ECM has not been
programmed to allow the Fleet Trip Reset by the driver, this screen is not
available.)
−
−
−
−
“FLEET TRIP”
“RESET
PERFORMED”
“Fleet Trip Reset
Completed”
“Indicates the Fleet Trip Segment has been reset. Pressing any button
will return display to the FLEET TRIP SEGMENT title screen.” (The 3176B
ECM, 3176C ECM, 3406E ECM, C-10 ECM, C11 ECM, C-12 ECM, C13
ECM, C15 ECM, C-15 ECM, or the C-16 ECM must be programmed in
order to allow the “Fleet Trip Reset” by the driver.)
−
5-2.6.5 “Lifetime Totals” Screens
The screen for the “Lifetime Totals” has ten parameters. The parameters are “Average Fuel Economy”, “Distance Traveled”,
“Average Speed”, “Fuel Used”, “Engine Run Hours”, “PTO Fuel Used”, “PTO Hours”, “Idle Fuel Used”, “Idle Hours”, and
“Percent Idle Time”. This information is maintained by the engine ECM for the life of the engine.