Blue Bird Coachworks 450 LXi, Owner'S Manual

Page: 283 / 684

4-16 Audio/Video Components
450 LXi Owner Manual
~ 4-16-76 ~
Rev. “C”
4-16.4.31 Review, Replace or Clear Program Contents:
(Recording is not in progress)
Press PROG to display Program List. 1.
To Cancel a Timer
Recording in Progress. . .
Hold down STOP in VCR mode for a few seconds to cancel
the Timer Recording.
(The “TIMER” Indicator goes out on Multi-Function Display.)
Any future daily or weekly recording will be performed
as programmed. •
Press ▲▼ to select number and
press SET to display. 2.
To Replace program . . .Repeat Step 2 (previous
section) to set new programs.
Or
To Clear Program. . .Press ADD/DLT.
Press PROG to end the programming.
3.
4.
Important Notes When Using DSS Receiver
When recording programs via DSS Receiver, DSS Receiver must be left on.
When recording programs via an antenna or cable, DSS Receiver must be turned off. •
•
NOTES:
If you are using a Cable Box, the VCR’s channel for Timer Recording must be set to the Cable Box
input channel and Cable Box must be manually set to the desired channel. Cable Box power must be
left on.
2 minutes before Timer Recording is performed, “PLEASE -PREPARE FOR TIMER REC” appears and
Timer Indicator fl ashes. Be sure a cassette with record tab is loaded and DECK is in Stop mode.
If a power interruption occurs while programming the timer, the timer program(s) may be canceled. If
“TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen, please re-enter
the timer programs.
If the start time for Timer Recording comes up during recording and playing back, Timer Recording
will not be performed.
•
•
•
•