Blue Bird Coachworks 450 LXi, Owner'S Manual

Page: 296 / 684

450 LXi Owner Manual 4-16 Audio/Video Components
Rev. “C”
~ 4-16-89 ~
Setting the VOLUME ADJUST
Some DVDs are recorded in lower average volume level. For these DVD, this DECK can be set so that the average volume is
increased.
Press VOL.ADJ repeatedly to change “ON” ↔ “OFF.”
“ON” or “OFF” lights up on Multi Function Display (for about 3 seconds) when press VOL.ADJ.
VOLUME ADJUST “OFF” VOLUME ADJUST “ON”
Some DVD
[Volume level is low]
Volume is the original level.
Volume level is increased
when played back.
“ON” is set. . .When a DVD is played back, the average volume is increased.
“OFF” is set. . .The volume level recorded on the disc is played back just as it is.
•
•
4-16.4.42 DVD Operation Using On-Screen Displays
When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number,
elapsed playing time) and DECK information (repeat play, play mode).
Press DISPLAY in Play or Stop mode to display “On-Screen Displays.”
Each press of DISPLAY changes the on-screen display as follows. (See “Detailed
Descriptions of Each On-Screen Display” found later in manual.)
1.
•
Ready Checklist
□ DECK is in DVD mode, press DVD.
Press (or ) to select an item, and press SET .
Press or NUMBER keys to select the setting, and press SET.
2.
3.
If the number entered is not on the disc, the entry will have no effect.
Re-enter the correct number.
For more details, refer to the disc operation information.
To return to normal screen, press CLEAR or DISPLAY repeatedly.
•
•
When numbers are displayed (e.g. title number), NUMBER keys are also available. •
NOTES:
When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.” •
•
NOTE: DISPLAY button does not function while DVD TITLE
MENU is displayed.
NOTES:
When DISPLAY button is pressed during playback of a Video CD with Playback control NUMBER keys are not
available on the displayed screen. In this case, press DISPLAY again to remove the displayed screen.
When appears on the screen while a button is being operated, it means that the corresponding
operation is prohibited by DECK or the disc.
•
•