109
[1.6 COMMAND]
(CtL-)
Assignment conditions for logic inputs and control bits
The following elements are available for every command or function that can be assigned to a logic input or a control bit:
Note: In [I/O profile] (IO) configuration, LI1 cannot be accessed and if
[2/3 wire control]
(tCC)
page
77
=
[3 wire]
(3C)
, LI2, C101,
C201, C301, and C401 cannot be accessed either.
[LI1]
(LI1)
to
[LI6]
(LI6)
Drive with or without option
[LI7]
(LI7)
to
[LI10]
(LI10)
With VW3A3201 logic I/O card
[LI11]
(LI11)
to
[LI14]
(LI14)
With VW3A3202 extended I/O card
[C101]
(C101)
to
[C110]
(C110)
With integrated Modbus in [I/O profile] (IO) configuration
[C111]
(C111)
to
[C115]
(C115)
With integrated Modbus regardless of configuration
[C201]
(C201)
to
[C210]
(C210)
With integrated CANopen in [I/O profile] (IO) configuration
[C211]
(C211)
to
[C215]
(C215)
With integrated CANopen regardless of configuration
[C301]
(C301)
to
[C310]
(C310)
With a communication card in [I/O profile] (IO) configuration
[C311]
(C311)
to
[C315]
(C315)
With a communication card regardless of configuration
[C401]
(C401)
to
[C410]
(C410)
With Controller Inside card in [I/O profile] (IO) configuration
[C411]
(C411)
to
[C415]
(C415)
With Controller Inside card regardless of configuration
[CD00]
(Cd00)
to
[CD10]
(Cd10)
In [I/O profile] (IO) configuration
[CD11]
(Cd11)
to
[CD15]
(Cd15)
Regardless of configuration
WARNING
UNINTENDED EQUIPMENT OPERATION
Inactive communication channels are not monitored (no lock following malfunction in the event of a communication bus
failure). Make sure that the commands and functions assigned to bits C101 to C415 will not pose a risk in the event of the
failure of the associated communication bus.
Failure to follow these instructions can result in death or serious injury.
Summary of Contents for ER40-G
Page 2: ......
Page 21: ...21 The display flashes to indicate the presence of a fault ...
Page 241: ......
