Blatchford SBWTTCP22, Instructions For Use Manual

Page: 14 / 152

938461PK2/2-0822
14
15 Technical Data
Principal Materials polyamide, lycra, silicone
Shore Hardness 30-35 Shore 00
Component Weight ( size 28 ) 695 g (1 lb 8 oz)
Activity Level Low to Moderate
Size Range
(see Section 7 Choosing the Correct Size )
22-40 cm
Length
(See Dimensions )
435 mm
Internal Length
(See Dimensions )
420 mm
Operating and
Storage Temperature Range
-15 ˚C to 50 ˚C (5 ˚F to 122 ˚F)
Locking Liner Only
Matrix Length Approx. 10 cm
Distal End Attachment M10
Requires Locking Pin With a Shoulder*
Locking Pin Shoulder Diameter 13.5-19 mm
*Locking Pin Not Supplied
15.2.1
Separation of the Valve from the Distal Cap
If the valve falls off the distal cap, refer to the following table:
Cause Solution
The valve is not fitted correctly. Make sure that the washer is between the
pin and the valve. ( See Section 12 Fitting the
Valve.)
Note… Do not over-tighten the locking pin/lock rod.
15.2.2 Oedematous Swellings Corresponding to Distal Perforations
Cause Solution
Excessive distal contact Reduce end pressure by addition of extra
socks or lengthen/remake socket