Table 4-13. Detail Counter screen options.
Parameter Description
Detail Counter
Displays the detailed counting number of each port’s traffic. The
Detail Counter window can show all counter information of each port
at onetime. To get to this screen, click on Detail Counter in the Port
menu.
Select
Choose the port number from the drop-down menu.
Refresh Interval
Select the interval from the drop-down menu. The valid range is 3 to
10 seconds, and the default is 3 seconds.
Reset button
Click on this button to reset the choices.
Rx Packets
Total packets received.
Rx Octets
Total received bytes.
Rx Error
Number of bad packets received.
Rx Unicast Packets
Show the counting number of the received unicast packet.
Rx Broadcast Packets
Show the counting number of the received broadcast packets.
Rx Multicast Packets
Show the counting number of the received multicast packets.
Rx Pause Packets
Show the counting number of the received pause packets.
Tx Collisions
Number of collisions transmitting frames experienced.
TX Single Collision
Number of frames transmitted that experienced exactly one collision.
Tx Multiple Collision
Number of frames transmitted that experienced more than one
collision.
Tx Drop Packets
Number of frames dropped due to excessive collision, late collision,
or frame aging.
Tx Deferred Transmit
Number of frames delayed to transmission due to the medium is
busy.
Tx Late Collision
Number of times that a collision is detected later than 512 bit-times
into the transmission of a frame.
Tx Excessive Collision
Number of frames that are not transmitted because the frame
experienced 16 transmission attempts.
24-Port 10/100BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
46
