Table 4-9 (continued). Port Configuration menu options.
Parameter Description
Speed/Duplex Mode
Displays all ports’ speed and duplex settings. Three speeds (10
Mbps, 100 Mbps, and 1000 Mbps) are supported for TP media, and
half-duplex and full duplex are supported. If the media is 1-Gbps
fiber, 1000-Mbps is supported. The speed/duplex mode status is
determined by 1) the negotiation of both local port and link partner in
Auto Speed mode or 2) user setting in Force mode. The local port
has to preset its capability.
In port 1 – 24, they are supported Fast Ethernet with TP media only,
so the result will show 100M/Full or 100M/Half, 10M/Full and
10M/Half duplex.
In port 25 and port 26, if the media is 1000Mbps with TP media, it will
show the combinations of 10/100M and Full/Half duplex, 1000Mbps
and Full duplex only. If the media is 1000Mbps with fiber media, it will
show only 1000M/Full duplex.
Default: None, depends on the negotiation result.
Rx Pause
The way that the port adopts to process the PAUSE frame. If it
shows
on
, the port will care the PAUSE frame; otherwise, the port
will ignore the PAUSE frame.
Default: None
Tx Pause
It decides that whether the port transmits the PAUSE frame or not. If
it shows
on
, the port will send PAUSE frame; otherwise, the port will
not send the PAUSE frame.
Default: None
Table 4-10. Ports 25
---2
6.
Parameter Description
Connector Type
Displays the connector type—for example, UTP, SC, ST
®
, or LC.
Fiber Type
Displays the fiber mode—for example, multimode or single-mode.
Tx Central Wavelength
Displays the fiber optic transmitting central wavelength—for example,
850-nm, 1310-nm, or 1550-nm.
Baud Rate
Displays the fiber module’s maximum supported baud rate—for
example, 10M, 100M, or 1G.
24-Port 10/100BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
42
