Table 4-12. Simple Counter screen options.
Parameter Description
Simple Counter
Displays each port’s traffic summary counting, including Tx Byte, Rx
Byte, Tx Packet, Rx Packet, Tx Collision, and Rx Error Packet.
Refresh Interval
Select a number (in seconds) from the drop-down menu.
Reset button
Click on this button to reset the simple counter.
Port No.
The port number.
Tx Byte
Total transmitted bytes.
Rx Byte
Total received bytes.
Tx Packet
Total transmitted packets.
Rx Packet
Total received packets.
Tx Collision
Total collisions experienced while transmitting frames.
Rx Error Packet
Total bad packets received.
4.3.4 D
ETAIL
C
OUNTER
The Detail Counter collects any information and provides the port traffic counting, whether the packet is good
or bad. To get to this screen, click on Detail Counter in the Port Configuration screen.
The Detail Counter window can show only one port counter information at the same time. To get to this screen,
click on
Detail Counter
in the Port menu. To see another port’s counter, select it from the drop-down menu.
Each data field is 20 digits long. If the counting is longer than 20 digits (overflows), the counter will be reset
and restart counting. The data is updated every user-defined time interval. The valid range is 3 to 10 seconds.
The Refresh Interval is used to set the update frequency. The default update time is 3 seconds.
CHAPTER 4: Web-Based Management
45
