34
Press the arrow keys (
▲
▼
) to move the cursor to the wanted configuration. Press the
ENTER key to change its value and then press the ENTER key again to confirm the changes.
Configurations
Range
Description
Comm. Type
USBVCP, USBTMC,
GPIB, LAN, RS232
USBVCP: USB Virtual Com Port (19200,
N, 8, 1)
USBTMC: USB Test and Measurement
Class. (NI VISA Driver is needed)
GPIB: General-Purpose Interface Bus
LAN: Local Area Network
RS232: (On Digital I/O board 19200, N,
8, 1)
GPIB Address
1 to 30
Set the GPIB address
IP Mode
DHCP (Auto), Manu,
(STATIC)
Select how to assign the IP.
DHCP: Auto assigns IP.
Manu: Assign IP address, subnet mask,
and gateway manually.
IP Address
XXX : XXX : XXX : XXX
IP address
Subnet Mask
XXX : XXX : XXX : XXX
Subnet mask
Gateway
XXX : XXX : XXX : XXX
Gateway
Table 14 - Communication Configurations
9.3
System Error
The System Clear Error page is used to view and clear the error log. Use
＋
－
key or rotary
knob to see other error messages.
Figure 33 System Error Log
www.
GlobalTestSupply
.com
Find Quality Products Online at:
