23
yellow boxes when no entries are stored in any List.
Figure 19 - List Mode second page
Refer to . Use the arrow key (
▲
▼
) to move the cursor to the wanted parameter of List
Step Configuration page. Press the ENTER key to change its value, then press the ENTER
key again to confirm the change.
Parameters
Values
Volts (rms) Start
80
Volts (rms) End
0
Volts (DC) Start
0
Volts (DC) End
0
Freq. (Hz) Start
50
Freq. (Hz) End
50
Time (ms)
100
Steps
5
Figure - List 0, User Step 1 Values
After all of the values from have been entered, press the Add Step softkey to enter all
the changes in to memory and create a new step in List No. 0. The Empty Step will
change to 99 and Current Step will change to 1.
Figure 20 – List Mode Add Step
Refer to Figure 21 - List 0, Step 2 Values
www.
GlobalTestSupply
.com
Find Quality Products Online at:
