24
. Use the arrow keys (
▲
▼
) to move the cursor to the wanted parameter of List Step
Configuration page. Press the ENTER key to change its value, then press the ENTER key
again to confirm the change.
Parameters
Values
Volts (rms) Start
60
Volts (rms) End
0
Volts (DC) Start
0
Volts (DC) End
0
Freq. (Hz) Start
50
Freq. (Hz) End
50
Time (ms)
60
Steps
3
Figure 21 - List 0, Step 2 Values
After all of the values have been entered, press the Add Step softkey to enter these
changes in to memory and add a new step in List No. 0. The page with Empty Step field
in yellow will change to 98 and Current Step to 2.
Figure 22 - Add New Step
Parameters
Settings
Volts (rms) Start
40
Volts (rms) End
0
Volts (DC) Start
0
Volts (DC) End
0
Freq. (Hz) Start
50
Freq. (Hz) End
50
Time (ms)
20
Steps
2
Volts (rms) Start
40
Volts (rms) End
0
Table 8 - List Mode Parameters
After all of the values have been entered, press the Add Step softkey to enter these
www.
GlobalTestSupply
.com
Find Quality Products Online at:
