32
Press the arrow key (
▲
▼
) to move the cursor to the wanted configuration. Press ENTER
key to change its value, then press ENTER key to confirm.
Figure 30 - Configure Limits
Move the cursor to Volts (rms). Use
▲
▼
keys (or Rotary knob) to set the value of Volts
(rms) limit and other configurations. Then press OK or Enter key to confirm this setting.
Use
▲
▼
keys (or Rotary knob) to select other configurations.
NOTE: If the output exceeds the limit value the Instrument will stop and the output will display an error
message. Press the
Esc
key to close the message window.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
