BT-750 Operator Manual 5
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
1.4 General Precautions on Electric safety
Prior to operation of the equipment, make sure to check followings
Caution
Whether power supply is appropriate. (100 – 240VAC)
Caution
Whether connections (power line or selected equipment) are properly
made to the equipment.
Caution
Whether the correct measuring accessory for required parameter is
connected to the equipment prior to turning on the equipment.
Caution
BT-750 can be used alongside with defibrillator while the accuracy
of the product may be fallen in a short time
Caution
Use of this product is prohibited during MRI photographing. A fire
may breakout from the induced current, and the accuracy of the
product and the MRI may be influenced by cross interference.
Caution
BT-750 is intended only to measure and assess patient state. It must
be used in conjunction with Clinical signs and symptoms when
diagnosis is made.
Caution
The computerized ECG analysis should be judged by qualified
medical professionals, and should not be the sole basis in
determining necessity of treatment for the patient.
Caution
Leakage, heating, firing or disruption of the battery may cause fire or
injury.
Caution
Do not use batteries beyond those specified in this manual.
Caution
Do not short-circuit the battery and does not heat, integrate, or
dispose of it in a fire.
Avoid placing in an area
where there is an
excessive humidity rise or
ventilation problem.
Operating humidity ranges
to 80% RH max @40
C.
Avoid placing in
an area where
there is an excessive
shock or vibration.
Avoid placing in an area
where chemicals are
stored or where there is in
danger of gas leakage.
Avoid dust and
especially metal
material into the
equipment.
Do not disjoint or
disassemble the equipment.
BISTOS Co., Ltd. does not
take responsibility of it.
Disassembling of equipment
should be done only by the
authorized personnel.
Power off when
the equipment is
not fully installed.
Otherwise, the
equipment could
be damaged.
