BT-750 Operator Manual 39
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
5.11 Printer Setup
[Pinter Menu Display]
1) Press the menu button “
” to go to Setup
Printer Setup.
2) Select the menu to change with trim knob and press the trim knob to set the location
to be modified. Then, selected menu is displayed.
3) Press the trim knob to make the display window active in second time.
4) Go to the required location with tramp knob and press the tram knob to set thelocation
to be modified ,then the setting location becomes active .
5) Turn to right and left with trim knob and press the trim knob to set up the numeric
value and save it.
6) Press “Return” button to go back to 1
st
display window.
7) Press the button “
” to return to main display.
● Select the each Printer Mode using same method.
Setup Mode
Range of change
Description
WAVE
ECG 1+ PLETH
ECG 1+ CAPNO
Select the waveform to print out
PRINT SPEED
15/30 mm/sec
Select speed of printer
ALARM
ON / OFF
ON: Print out in case of over alarm limit
automatically.
OFF: manual printing
