BT-750 Operator Manual 48
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
2)
Set up the patient circuit according to the directions for use of the transducer, monitoring
kit.
3) “Hold the backside of the clear cover surrounding the connector, and connect the converter
to the reusable monitor interface.
4) In a clean environment, open the package to check if all parts are well connected and if the
handle of the “stopcock” is positioned properly. All side ports of the stopcock are protected
by the outlet plugs and may not be removed till the system is full and the foam has been
removed. These outlet plugs should always be replaced with other outlet plugs. (A pouch is
included in the kit.).