BT-750 Operator Manual 40
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
Chapter 6
Measurement of ECG and Respiration
6.1 Setup Connections
1) Connect the ECG cable to the ECG connection terminal of the measurement module.
● The process of depolarization and polarization of the myocardium generates electronic
potentials that are sensed by ECG electrodes on the skin surface.
● Changes in the chest impedance resulting from the patient’s respiration is measured and
displayed as a waveform and the values will appear on the screen.
2) Attach the patient’s electrode to the sites shown below.
<Standard 5 Electrode Placement> <Standard 3 Electrode Placement>
R: Red
L: Yellow
C:
White
N: Black
F: Green
R: Red
L: Yellow
F: Green
ECG Connector
