Bioer GeneQ Thermal Cycler, Manual, Page: 19 / 33

Gene Q Thermal Cycler Chapter 4 Operation Guide
— 13 —
In this interface press “ Digit & Letter ” to
enter the file name. Press “ Enter ” to move
the cursor forwards one position. Select
User and File Name through pop-up key.
Click left button to delete characters while
clicking right button to move the cursor.
Press “
Caps ” key to shift the capital or small
letter, and there will be a capital or small
letter indication on the left top of the screen.
(as the example: abc)
 Press “ Main ” to go back to the main
interface.
 Press “ Save ” to save the file. When the
file is normally saved, the system will
remind “File have been saved. Please
continue another operation”, Press
“
Enter ” to cancel the reminding bar. If the file was used, the system will remind you to rename
（
Rename
）
or continue to save (Save).
 If the current Control Mode is Block mode, press “ Run ” to enter file running interface; if the
current Control Mode is Tube mode, press “ Run ”, thus a dialog box for indicating to input
sample volume will be displayed.
Press Character button to input sample volume according to practical condition. Press “Back”
to go back file save interface. Press “Run” to enter file running interface.
Enther the file save interface, if the user press “Run” without pressing “Save”, the system will
remind “The modifications will be lost after running. Do you still want to run?”

Press “ No ” to go back file save
interface.
 Press “ Yes ” to enter file running
interface and sample volume input
interface. (Note: the modification here
cannot be saved after the program is
running over.)
 Press “ Yes ”, if the current Control
Mode is Block mode, the program will
enter file running interface; if the
current Control Mode is Tube mode,
the system will pop up a dialog box of
sample volume input:
The user can input Sample Volume (Unit: Micro liter) by the same way as that of the main
interface. Press “Back” to go back to File List Interface, Press “Run” to enter into file running
interface.
Hotlid=off 2007-07-28 10:05:00
abc
User
：
BIOER
File Name
：
PCR1
Password
：
Password confirm
：
No Yes
File Save Interface
Hotlid=off 2007-07-28 10:05:00
abc
User ： BIOER
File Name ： PCR1
Password ： *****
Password confirm ： *****
Main Caps Save Run
Please enter sample volume:
050μl
The modifications will be lost after running.
Do you still want to run?
Please enter sample volume:
050μl