Bioer GeneQ Thermal Cycler, Manual, Page: 16 / 33

Gene Q Thermal Cycler Chapter 4 Operation Guide
— 10 —
Hotlid=off 2008-07-28 10:05:00
BIOER
Bioer Technology Co.,Ltd
Version:
2008-2.0
Default User: BIOER
Default File: PCR1
Module Select: 24*0.2
Control Mode: Block
Back Run
showed to indicate the user to input the
password.
Press digtal button to enter password
directly. Press “Back” to go back the main
interface. Press “
Accept ” to confirm the
password, thus to enter file running
interface or sample volume input window.
If the password is wrong, there will be
displayed a dialog box as below:
 If the current Control Mode is Block mode,
press “
Accept ” button to enter file running
interface. If the current Control Mode is
Tube mode, press “
Accept ” button, thus
there will be displayed a dialog box to
indicate the user to input the sample
volume.
Press Character button to input sample
volume according to practical condition.
Under Tube mode, the overshooting
temperature and keeping time will be
dirrerent in the case of different sample
volume.
 Press “ Back ” to go back the main interface.
 Press “ Run ” to enther file running interface.
2
How to Edit a PCR Program
Press “ File ” on the main interface to enter file list interface. There are 3 files listed in the form as
showed in the picture. When the flashing bar is flashing in the User Column, select users through
pop-up key; at this time, the File Name Column will display the relative files of the selected user
dynamically. Shift to the File Name Column, where the flashing bar will flash, thenselect relative
user’s file through pop-up key.
Hotlid=off 2008-07-28 10:05:00
BIOER
Bioer Technology Co.,Ltd
Version:
2008-2.0
Default User: BIOER
Default File: PCR1
Module Select: 24*0.2
Control Mode: Block
Back Accept
Enter password
-
Please enter sample volume:
020μl
Please enter sample volume:
020μl
Password error. Try again.
-
Enter password
-