BioCare Medical ONCPRO0001 Operating Manual Download Page 10

Page: 10 / 87

ONCORE PRO, Operating Manual, Rev. K

Figure 3

Feet

adjusted to level the instrument on the work surface.

Main Power Supply

connects to the wall outlet and provides power to the instrument.

Power Supply Switch

turns the power supply on/off.

AC Power Port

is the position to plug in the power cord.

Fan

provides cooling to the instrument and its electrical components.

USB Port

is the position to plug in the USB cable.

U-Ring

is the position to attach an anti-theft chain to the computer.

Waste Tubing (Blue)

connects the waste station to the waste container to transfer waste (gravity-fed).

Hazardous Waste Tubing (Black)

connects the waste station to the hazardous waste container to transfer

hazardous waste (gravity-fed).

Summary of Contents for ONCPRO0001
























































































Search results

Summary of Contents for ONCPRO0001

Reviews:

Related manuals for ONCPRO0001

Brands by name

Popular brands

BioCare Medical ONCPRO0001, Operating Manual

Search results

Summary of Contents for ONCPRO0001

Reviews:

Related manuals for ONCPRO0001

Brands by name

Popular brands