BioCare Medical ONCPRO0001 Operating Manual Download Page 68

Page: 68 / 87

ONCORE PRO, Operating Manual, Rev. K

Click “

Label Format

” to open the

Label Formatter

and edit the printable data on the label. The user may change

the line order on the label or select new data types to be printed on each line of the label.

Note: Some data types are only available for use with an LIS system.

Figure 94

Select the

Label Style

to change the layout of the label.

Select data types from the dropdown list for each line.

Click “

Save

” to save changes to the label format.

Note: Please verify that the printed data will not overlap with the 2D barcode label.

Click “

Edit Doctor Name List

” to add new doctors to the dropdown list in the Barcode Label Editor.

Figure 95

To add a new doctor

, enter a new name and click “

Add

”.

To remove an existing doctor

, select a name from the dropdown

list and click “

Remove

”.

Click “

” after editing the label formatting option.

The default label format is displayed below.

Figure 96

ProtocolName
PatientID
CaseNum
DateTimeEntry 2D Barcode
TextLine1
TextLine 2 m/n

Summary of Contents for ONCPRO0001
























































































Search results

Summary of Contents for ONCPRO0001

Reviews:

BioCare Medical ONCPRO0001, Operating Manual, Page: 68 / 87

Search results

Summary of Contents for ONCPRO0001

Reviews: