Binder 9020-0402, Translation Of The Original Operating Manual

Page: 29 / 173

MK LIT (E5) 01/2021 page 29/172
5.7 System logbook
Inspections with results and any measures taken, as well as measures taken for maintenance and repair,
must be documented in a system logbook as written evidence.
All events that occur during operation and all measures to safeguard operational readiness must be entered
into the system logbook.
• Chamber data: Overview and master data of the system
•
Operating events such as alarms, fault notifications, shutdowns
•
Maintenance and repair measures such as inspection, maintenance, repair, checks/tests
• Notification and fault statistics
Observe the relevant statutory regulations.
Entries in the system logbook must be made by the installer and the operator of the system.
The logbook must be available at all times and stored in the immediate vicinity of the plant.
5.8 Operation log
For safety reasons, keeping an operation log, in which every use of the chamber can be entered is recom-
mended
The following contents should be entered and recorded:
•
Type of charging, arrangement and specification of the accumulators
• Entered set-points on the MB2chamber controller
•
Set test parameters of the operator, test series…
•
Set safety controller mode (Limit/Offset) and safety controller value
• Activation of gas detection
• Activation of additional safety measures by the operator
•
Information on the superordinate control system of the operator
•
Condition after checking the safety devices
• Responsible, date, signature