MK LIT (E5) 01/2021
page 152/172
Prior to handing the chamber over to a recycling company, it is the user’s responsibility that it
is free from toxic, infectious or radioactive substances.
•
Prior to disposal, clean all introduced or residual toxic substances from the chamber.
•
Prior to disposal, disinfect the chamber from all sources of infection. Be aware that sources
of infection may also be located outside the inner chamber.
•
If you cannot safely remove all toxic substances and sources of infection from the chamber,
dispose of it as special waste according to national law.
•
Fill out the contamination clearance certificate (chap. 32) and enclose it with the chamber.
WARNING
Danger of intoxication and infection through contamination of the chamber with
toxic, infectious or radioactive substances.
Damages to health.
∅
NEVER take a chamber contaminated with toxic substances or sources of infection for
recycling according to Directive 2012/19/EU.
Prior to disposal, remove all toxic substances and sources of infection from the cham-
ber.
A chamber from which all toxic substances or sources of infection cannot be safely re-
moved must be considered as “special” waste according to national law. Dispose of it
accordingly.
The refrigerant used 452A is not inflammable at ambient pressure. It must not escape into the environment.
In Europe, recovery of the refrigerant 452A (GWP 2140) is mandatory according to regulation No.
842/2006/EC. Ensure the compliance with the applicable legal requirements regarding qualification of staff,
disposal, and documentation.
29.4 Disposal of the chamber in the member states of the EU except for the Fed-
eral Republic of Germany
According to Annex I of Directive 2012/19/EU of the European Parliament and of the Council on waste
electrical and electronic equipment (WEEE), BINDER devices are classified as “monitoring and control
instruments” (category 9) only intended for professional use“. They must not be disposed of at public col-
lecting points.
The chambers bear the symbol for the marking of electrical and electronic equipment man-
ufactured / placed on the market in the EC after 13 August 2005 and be disposed of in
separate collection according to the Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE). WEEE marking: crossed-out wheeled bin with solid bar under.
At the end of the device’s service life, notify the distributor who sold you the device, who will
take back and dispose of the chamber according to the Directive 2012/19/EU on waste elec-
trical and electronic equipment (WEEE).
Summary of Contents for 9020-0402
