Bilanciai DD1010, Use, Maintenance And Installation Manual, Page: 59 / 132

57
DD1010 FLYNET

Weight
< setpoint

Weight > setpoint

Weight ≥ setpoint
Timeout Time, expressed in seconds, after which the output is
activated
Threshold Editable field to enter the weight value. The system
uses the unit of measurement adopted by the scale.
Type of weight It is possible select the type of weight to activate the
output. Net Weight or Gross Weight only.
Update time Indicates how often (ms) the weight is checked.
Disabling input It is possible to select an input to deactivate the
setpoint operation.
Printers Printers
Select Printers through the key to add a printer to the indicator.
The models currently available on the indicator are:

Italora

Epson LX300

TM295

TM300

TPT60S4

STB80

STB60

STB112

VKP80II

Zebra

PLUS

Qseries
After selecting the printer, its settings are loaded.
Press to access the customization section specific for each printer
(paper cutting, line feed, etc.).
After setting the printer, it is possible to select the COM port on which it
will interface. The COM ports available depend on the indicator and the
optional boards used.
We suggest for the following indicator to connect the printer to COM4.
Readers
Readers
Select Readers through the key to add a reader to the indicator.
The models currently available on the indicator are:

Gigatek

Coges

DEISTER

DEISTERPLUS

HF0450

HID

Tirfid

Transit

Vecos