12
DD1010 FLYNET
1.10
Instructions for disposal of electrical or electronic waste
This symbol on the weighing instrument purchased indicates that:
This electrical or electronic equipment cannot be disposed of as solid
urban waste.
Separate collection is required.
It can be returned to the distributor when purchasing new equipment.
Improper use or disposal of such equipment may cause pollution to the
environment or endanger human health.
Failure to comply with the above indications is subject to sanctions
according to the regulations in force.
In particular:
Outer casing and mechanical components are made of plastic and/or metallic materials.
The casing contains printed circuit boards with electronic components.
The electrical connections are made with insulated copper conductors.
ATTENTION
Dispose of this equipment via separate waste collection either handing it over to the distributor or
to separate waste collection centres.
1.11
Instructions for technical service request
Any request for information or service intervention at the customer’s premises or clarification
regarding the technical aspects of the equipment or of this document must be addressed to:
In case of malfunctions or faults for which the intervention of specialised technicians is required,
please contact the nearest service centre (
http://www.coopbilanciai.it/it/home/rete-vendita-e-
by selecting your country) or directly the manufacturer.
In particular, the customer must provide the manufacturer with the following data:
type of equipment - model, identification number, year of manufacture;
serial number of the instrument available on the stamped label;
characteristics of the system on which the equipment is installed;
maximum capacity "Max=" and metrology division "e="
shortcomings detected
SOCIETÀ COOPERATIVA BILANCIAI
Headquarters and factory:
Via S.Ferrari, 16
41011 CAMPOGALLIANO (MO) ITALY
Tel. +39 059/893611 - Fax. +39 059/527079
www.coopbilanciai.it
Summary of Contents for DD1010
Page 2: ......