Page 32
Preparatory measures and technical requirements before the assembly
DR 1500
Edition: 08/10 M 4021 GB
7.6.2 Assembly order for dowelling
1.
Copy the hole spacing of the component part to the holding ground.
2.
The distance from edge to core material should at least be one length of a dowel.
3.
Select the appropriate drilling method for the building material.
4.
Depth of drill hole = dowel 1 x screw diameter
5.
Apply and clean drill holes (remove bore dust).
Figure 7-1: Expanding direction of dowels
6.
Insert dowels in expanding direction so that the expanding force of the dowel is
working parallel to the edge. This is counteracting separation of materials.
7.7 Sealing
7.7.1 Sealing with sealing tape
1.
Clean the areas that are to be sealed.
2.
Adhere the sealing tape centrally to a surface.
3.
Place the parts on top of each other and align them.
4.
Push the screws through the parts and screw them together.
Always read the assembly instructions on the packaging.
Summary of Contents for Dry Rapid DR 1500
