Big Dutchman Dry Rapid DR 1500, Mounting And Operating Instructions

Page: 91 / 185

Feed pipe
Page 81
DR 1500
Edition: 08/10 M 4021 GB
Pos. Qty. Code no. Description
1 83-00-2198 Corner 90deg SST/SST cpl. DR1500/TF-D60
1 14 99-20-1176 hHexagon nut M 8 SST DIN 934
2 14 99-20-1600 Washer SST A 8,4 DIN 125
3 1 83-00-2191 Body half upper SST DR1500
4 2 10-87-3733 Clamp ABS for corner TF-D60 /DR1500
5 14 99-20-1400 Hexagon head screw SST M 8x 16 DIN 933
1 83-00-2197 Body half lower SST DR1500 with corner wheel and
ball bearing
6 1 10-87-3739 Distance sleeve for corner wheel TF-D60/DR1500
7 1 10-87-3745 Corner wheel PA DR1500/TF-D60
8 1 83-00-2193 Body half lower SST DR1500
9 1 83-00-2196 Axle for corner SST TF-D60 /DR1500
10 2 99-98-4682 Ball bearing 6204 LLU
11 2 83-00-3827 Washer V 14,5x20x3x35 SST
12 1 83-00-3826 Washer R 15x35x3 SST
13 1 83-00-3829 Washer SST B 15 DIN 125
14 2 83-00-3828 Hexagon nut M 14 SST DIN 934
When assembling the corner wheel (pos. 7), pay attention to the
conveying direction (see figure 10-22).
Make sure to assemble washer R and washer B in the correct order. If the
washers are mixed up, the inner ring of the ball bearing is going to get
jammed once the hexagon nuts M12 are tightened.
In case of an outside-assembly, seal the corner with silicone.