Safety instructions
Page 11
DR 1500
Edition: 08/10 M 4021 GB
2.4.1 Clothing for personal safety
2.4.2 Assembly and maintenance
Assembly of the installation can be carried out by the farmer himself or by an authorized
person. We assume that the operator or authorized person either have some sort of
technical training or have the necessary knowledge or practical experience that are a
main condition for a proper assembly of the installation.
Repairs must only be carried out by persons who can guarantee for a proper execution
on the basis of their training or their practical knowledge and experiences. Only the
owner or the operator have the power of such a decision.
Every electrical work must only be carried out by qualified electricians according to the
respectively valid electrical regulations such as DIN, VDE, safety regulations and the
prescriptions of the local electric power supply companies or the regulations valid in the
country.
Only work with appropriate tools; in case of possible danger to hands, use protective
gloves, and safety glasses in case of danger to the eyes.
Wear close-fitting clothes when carrying out mounting, maintenance and
cleaning work at the installtation.
Do not wear rings, chains, watches or other items which could get caught
at parts of the installation.
Never work with long hair that is not tied together. Your hair could get
caught in moving devices or system parts and thus cause serious injuries.
During all mounting, maintenance and cleaning work at the installation,
wear protective clothes and shoes as well as safety glasses and gloves if
required.
Always switch off the installation, disconnect the power supply and make
sure that the installation cannot be switched on again before carrying out
any repair, maintenance and cleaning work or before removing any
malfunction.
Secure the installation by putting a fixed sign at the main switch "Do not
activate!" and if required add the note that maintenance work is carried
out.
Summary of Contents for Dry Rapid DR 1500
