BH FITNESS RW1000BM, Instructions For Assembly And Use

Page: 11 / 33

11
5.- FITTING THE ALUMINIUM RAIL.-
Insert the aluminium rail (76) onto the main body (1) in the
direction of the arrow, Fig.4, fit the screws (105) and
tighten securely.
6.- FITTING THE CONSOLE.-
Connect the console wire (110) with the wire (111) coming
out of the main body (1), Fig.5. Place the console (98) on
the main body (1) and fix it using the screws (109), Fig.5.
You can adjust the console angle, Fig.5A.
7.- FOOTRESTS ADJUSTMENT.-
Press the buttons (B), Fig.6, and move the footrests (103)
to adjust the position. Release the buttons (B) and move
the footrests until a click sounds to secure them. Fig.6.
8.- MOVEMENT & STORAGE.-
The unit is equipped with wheels (69) to make it easier to
move. The wheels located at the front of your unit make it
easier to move it into a chosen position, by lifting the rear
of the unit up slightly and pushing it, as shown in Fig.7.
Store your unit in a dry place, preferably not subject to
changes in temperature.
9.- MAINS CONNECTION (OPTIONAL).-
Insert the jack (m) on the transformer (104-not included)
into the connection hole (n) on the main body (1) (bottom,
rear of the machine) and then plug the transformer into a
220 V / 60Hz mains supply, Fig.8.
10.- RAIL GUIDES ADJUSTMENT.-
To adjust the guides of the rail loosen first the screw (85),
Fig.9, then adjust the other screws (84). Finally tighten the
screw (85) to fix the adjustment.
Do not hesitate to get touch with the Technical Assistance
Service if you have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR
NOTICE