BERTO’S SA-E75S-BF, Quick Manual

Page: 74 / 81

23
PRESS
C
B
A
TIMER
T1
T2
T3
POWER
ECO
SYSTEM
TIMER
T1
T2
T3
POWER
ECO
SYSTEM
TIMER
T1
T2
T3
POWER
ECO
SYSTEM
TIMER
T1
T2
T3
POWER
ECO
SYSTEM
6
Setting power (POWER mode)
A
After setting the cooking duration, the “POWER” LED
light flashes to indicate that you need to select the
heating power and the display shows “P3”: this word means
that the machine will work with all active resistances at
their maximum power.
B
If you want to exclude some resistances, rotate knob
“A”; the display sequentially gives all words that indicate
the following:
P1
Only central resistances are
active
P2
Only side resistances are
active
P3 All resistances are active
C
When the display shows the desired heating power
(for example “P2”), confirm by quickly pressing knob “A”
until you hear an acoustic signal.
7
Start and end cooking
After setting the cooking duration through the “TIMER”
mode and the heating power through “POWER” mode,
cooking will begin, ending once the set time is over.
To stop the machine before the cooking time is
completed, quickly press knob “A”.
At the end of cooking, the machine emits an acoustic
signal and the “TIMER” mode gets back to the last set
duration.
While cooking, the resistances may deactivate for short
periods.
Never use the unit without a crumb collection tray.
confirm the selected power
rotate the knob to see the three
available power levels: “P1”, “P2” and “P3”.
COOKING IN PROGRESS
with time set manually
COOKING IN PROGRESS
using the “T” programs
Countdown to the end of cooking
(in the example, it is 17 minutes and 59
seconds)
countdown to the end of cooking (in the
example, it is 14 minutes and 59 seconds)
selected cooking program (in the
example, it is “T1” that lasts 15 minutes)
Selected power level
(in the example P2)
selected power level (in the
example, it is P2)
6
7