BERTO’S SA-E75S-BF, Quick Manual

Page: 71 / 81

20
USE
A FEW IMPORTANT NOTES
The images refer to the SA/E60S-BF salamander machine
but, if it is not given differently, these instructions suit every
model.
This unit was designed and made for heating, toasting,
cooking au grating and cooking food .
Heat is produced by powerful infrared resistances or
armored resistances that are in the upper part of the
moveable top part of the machine.
1
The moveable top part can be lifted and lowered
manually to regulate the correct distance from the
products to cook according to their type and size.
Do not touch food with the top side otherwise the glass
that protects the infrared resistances or the armored
resistances can get dirty.
Food should be placed in a dish or a tray with short edges
and then on the unit grid.
2
. After cooking, lift completely the moveable top
side and remove the processed food. Wear heat-
resistant gloves to avoid getting burned by the infrared
resistances or the armored resistances.
On first use, it is recommended to thoroughly clean the
unit and its accessories as given in the specific chapter.
Then let the unit work in an open and well-ventilated
room, set the maximum power for about 15-20 minutes
without any food. This will allow the evaporation of both
the thermal insulating agents and the fat residuals due to
the mechanical workings of each piece.
Any possible unpleasant smell or smoke will disappear
gradually with use.
1
2