LB 925 Crocodile miniWorkstation
5. Software
84024BA2 Rev. 03, 04/2020
Page 35 of 68
4.
Configure the Assay Steps: Every step in the [List of Selected
Steps] must be configured using <Edit Name> and <Edit step>.
5.
Click on a step and on the respective button afterwards to
rename the step or to open a submenu for editing. For details
about editing steps, see chapter 5.4.1 - 5.4.6.
6.
When a step in the [List of Selected Steps] is highlighted, its
parameters are shown in the sub window [Step Parameter].
7.
Confirm all entries with<OK> to save the assay.
5.4.1
Edit an incubation step
1.
Switch on the incubator.
2.
Set the temperature using the bar or edit the [temperature
dialog box].
3.
For a defined [Incubation Duration] tick the check box
[Incubate for…] and set the time [hh:mm:ss].
4.
Confirm your settings with <OK>.
NOTICE
If your assay contains an incubation step, add an additional incubator
step at the end of the assay, which switches off the incubator!
