LB 925 Crocodile miniWorkstation
5. Software
84024BA2 Rev. 03, 04/2020
Page 39 of 68
5.4.5
Edit Measure (5-in-one only)
The Measure step must always be defined, because no filter is pre-
set.
1.
Choose between [Single Wavelength] and [Reference
Measurement] (two measurements) in the [Method] drop-
down list box.
2.
Choose a filter from the list of available optical filters in the
[Measurement] drop-down list box.
3.
If you have selected [Reference Measurement], select the
optical filter for the reference measurement.
4.
By default, the whole microplate is processed. If necessary,
select only the columns needed.
5.
Confirm your entries with <OK>.
5.4.6
Edit a Manual Step
