BERTHOLD TECHNOLOGIES LB 6775, Operating Manual

Page: 66 / 118

6 Operation LB 6775
66
63039BA2, Rev. 01, 07/2018
Plateau
The plateau shows if the detector is working stably. A plateau measurement is
therefore only carried out when the measured value drifts, or other doubts exist
about the function of the detector. A plateau measurement can help narrow down
the possible cause of the problem.
IMPORTANT
Usually there are no changes required in this window if the detector is in normal
operation. Changes of the below parameters can cause detector malfunction!
1
2
3
4
5 Button <Plateau Setup>
Button <Start Plateau>
Input field “Start VBias [V]”
Input field “Stop VBias [V]”
Input field “Steps [V]”]”
6
7
8
9 Input field “Sampling Time [s]”
Curve
Display field “VBias“
Display field “Cps. Meas.”
Fig. 19 Page “Plateau”
2
8
7
9
1
3
4
5
6