BERTHOLD TECHNOLOGIES LB 6775, Operating Manual

Page: 51 / 118

LB 6775 4 Installation
63039BA2, Rev. 01, 07/2018
51
4.4 Installation on a Pipeline
There are clamping devices for different pipe diameters and irradiation angles for
installing a detector on a pipeline. An example is shown in Fig. 6. For the detailed
description of the clamping devices and the associated dimension drawings, refer
to the operating manual of the corresponding clamping device.
1
2
3
4
5
Detector
Mount
Mounting device
Pipe
Shield
Fig. 6 Pipeline Installation
NOTICE
The clamping device used must be designed for a minimum weight of 12 kg.
NOTICE
Make sure that the sensitive part of the detector is fully in the radiation
beam. Otherwise the measurement accuracy will decrease. The sensitive part
is where the scintillator is located. Refer to the drawing for details.
NOTICE
A limit of 200,000 CPS should not be exceeded. In case higher count rates are
likely to appear, additional shielding has to be used to keep the count rate
below 200,000 CPS.