BERTHOLD TECHNOLOGIES LB 6775, Operating Manual

Page: 17 / 118

LB 6775 2 Safety Manual / Explosion Protection Manual
63039BA26, Rev. 03, 07/2018
17
2.3 Proper Use
The detectors are used along with an appropriate evaluation unit of Berthold Tech-
nologies GmbH & Co. KG and an appropriate radiation source to measure the radi-
ation intensity as part of a radiometric measurement.
The following constitutes proper use:
•
Strictly adhering to the instructions and procedural sequences and perform no
unauthorised third party actions that endanger your safety and the functional
efficiency of the detectors!
•
Observing the provided safety instructions!
•
Carrying out the prescribed maintenance measures or having them carried out
for you!
Improper Use
•
Failing to observe the specified safety instructions and instructions for the op-
eration, maintenance and disposal in the manual.
•
Any non-compliance with the present manual for the supplied products.
•
Applying conditions and requirements which do not conform to those stated in
the technical documents, data sheets, operation and assembly instructions and
other specific guidelines of the manufacturer.
•
Using the product in a damaged or corroded condition.
•
Restructuring or changing the system components.
•
Repairs of detectors that are used in hazardous areas by persons who are not
authorised by Berthold Technologies GmbH & Co. KG.
•
Using the product with
o
open or not properly closed base,
o
improperly closed entries,
o
insufficiently tightened or damaged screw connections i.e. cable glands,
adapters or blind plugs
1 .
•
Operation without the safety precautions provided by the manufacturer.
•
Manipulation or avoidance of existing safety equipment.
BERTHOLD TECHNOLOGIES GmbH & Co. KG shall only accept liability for/guarantee
the conformity of the device to its published specifications.
If the product is used in a way which is not described in the present manual, the
device's protection is compromised and the warranty claim becomes invalid.
1 blanking elements acc. to IEC 60079