BERTHOLD TECHNOLOGIES LB 6775, Operating Manual

Page: 32 / 118

2 Safety Manual / Explosion Protection Manual LB 6775
32
63039BA26, Rev. 03, 07/2018
2.11 Plan for Visual Inspection of the Detector
IMPORTANT
If you answer any of these questions with "No", you must make a note of the
measures you have taken to remedy this deficiency in the last column. Before
you take the detector into operation, make sure to verify the correctness of the
measures with your explosion protection officer again.
Date:………………..
Name:……………………………….. Yes No Measures
General examination
Is the housing free from corrosion, dents,
cracks, holes and deformation?
Is the cover of the detector mounted firmly?
Are the safety-relevant temperatures (ambi-
ent temperature and temperature classes)
met according to chapter 2.6?
Are the outer terminals of the equipotential
bonding intact?
Is the surface of the detector free from con-
tact with other, non-alloy steel parts?
Are the connected cables mounted strain-re-
lieved?
Is a circuit break installed?
Is the circuit break easily accessible by
maintenance personnel?