BERTHOLD TECHNOLOGIES LB 6775 Operating Manual Download Page 49

Page: 49 / 118

LB 6775

4 Installation

63039BA2, Rev. 01, 07/2018

Installation

4.1

Safety Instructions

WARNING

Danger of injury by falling loads



Never stand underneath a lifted or suspended load, keep at a safe distance.



Only use tested sling gear components appropriate for the transport weight.



Exclusively use the provided fixing possibilities (lifting brackets) for attach-
ing the sling gear.



Observe the marking for the centre of gravity on the outer packaging, if
applicable.



Wear head protection and safety shoes.

CAUTION

Danger of injury caused by heavy and bulky system components



Heavy and bulky system components should only be handled using aids and
by at least 2 persons.



Observe the guidelines for safe handling of heavy loads.



Ensure stability and use the provided fixing possibilities.

NOTICE

The applicable national regulations of the country of use have to be observed!

NOTICE

Only clamping devices approved by Berthold Technologies GmbH & Co. KG

should be used to install the device.

NOTICE

The device may only be operated if permanently installed.

Summary of Contents for LB 6775























































































































Search results

Summary of Contents for LB 6775

Reviews:

Related manuals for LB 6775

Brands by name

Popular brands

BERTHOLD TECHNOLOGIES LB 6775, Operating Manual

Search results

Summary of Contents for LB 6775

Reviews:

Related manuals for LB 6775

Brands by name

Popular brands