BERTHOLD TECHNOLOGIES LB 6775, Operating Manual

Page: 64 / 118

6 Operation LB 6775
64
63039BA2, Rev. 01, 07/2018
Detector Basic
IMPORTANT
Usually there are no changes required in this window if the detector is in normal
operation. Changes of the below parameters can cause detector malfunction!
1
2
3
4
5
Input field “Control Mode”
Input field “Default V_bias [V]”
Input field “Manual V_bias [V]”
Display field “Actual HV [V]”
Display field “Min. Temp. [°C]”
6
7
8
9
10
Display field “Max. Temp. [°C]”
Display field “Temperature [°C]”
Display field “Measurement”
Display field “Control”
Display field “Auxiliary”
Fig. 18 Page “Detector Basic”
Control Mode Detector Work Mode
0 = AUTO (recommended)
1 = Manual
2 = Plateau
IMPORTANT
Do not use "Manual" Control Mode unless directed otherwise. It can cause mal-
function of the detector.
Default V_bias [V] Standard bias voltage in automatic mode.
IMPORTANT
Do not use change bias voltage default value unless directed otherwise. It can
cause malfunction of the detector.
1 2 3 4 5 6 7 8 9 10