BenQ DC E40 User Manual Download Page 9

Page: 9 / 60

BenQ DC 5530 User’s Manual

Eng
lish

Preparing Your DC E40 for Use

REPARING

OUR

DC E40

FOR

The lithium ion battery included with the DC E40 allows you to take photos, record movie and
sound clips. Use the AC adapter whenever possible to conserve battery power.

2.1

Inserting the Battery

Turn the camera off.

Slide the battery cover in the direction of the arrow

and open the battery/SD card

cover .

Push the battery latch in the direction of the arrow

and insert the battery in the correct

orientation as shown

with the notches facing up. If the battery is inserted incorrectly,

the latch will not close.

Close the battery/SD card cover

To remove the battery: open the battery cover and push the battery latch. The battery pops out
slightly; remove the battery.

Note

•

Use only the specified battery type (lithium-ion battery).

•

If you are not going to use the battery for an extended time, remove it from the camera to
prevent leakage or corrosion.

•

Avoid using the battery in extremely cold environments. Low temperatures reduce bat-
tery life and performance.

PEN

Battery Latch

Summary of Contents for DC E40





























































Search results

Summary of Contents for DC E40

Reviews:

Related manuals for DC E40

Brands by name

Popular brands

BenQ DC E40, User Manual

Search results

Summary of Contents for DC E40

Reviews:

Related manuals for DC E40

Brands by name

Popular brands