BenQ DC 5530 User’s Manual
Recording Sound Clips
26
Eng
lish
5
R
ECORDING
S
OUND
C
LIPS
Sound Recording mode allows you to use the DC E40 as a voice recorder. Sound recordings are
saved on the installed SD memory card or in the camera’s internal memory.
Sound is recorded by the built-in microphone located at the top of the camera.
Follow these steps to record a sound clip.
1.
Turn the camera on.
2.
Set the Mode switch to Sound Recording mode
. The sound clip recording screen
appears:
3.
Tap the record icon
to begin recording the sound clip. You can also press OK to
start recording (push the Navigation button), or press the shutter button.
4.
The elapsed recording time appears in red next to the microphone icon in the center of the
LCD screen.
5.
Tap the stop icon
, press OK, or press the shutter button to finish recording. The
available remaining recording time at the top right corner of the LCD screen is updated.
Note
•
You cannot record a movie or sound clips with a length of less than 3 seconds.
•
Movie or Sound clips will become damaged if you switch off power during the recording
process.
Microphone
DISP
00 : 00 : 00
REC.
00:05:13
Standby
Total length of
audio that can be
stored in memory.
Record button (tap
to start recording a
sound clip)
Remaining battery
power
REC.
REC.
