BenQ DC E40 User Manual Download Page 40

Page: 40 / 60

BenQ DC 5530 User’s Manual

Playing Back Photos, Movies and Sound Clips

Eng

lish

6.4.4 Listening to Voice Memos

Follow these steps to listen to a voice memo that was previously added to a photo.

In Playback

mode, select a photo with

a voice memo. You will see the Voice Memo
icon

in the top left corner of the LCD

screen.

Tap the Menu

icon.

Tap the Voice Memo

icon. The Record

Voice Memo screen appears.

Tap the Play Voice Memo

icon to play

the voice memo for the photo using the
camera’s built-in speakers or attached
headphones.

Tap Stop or press OK on the Navigation
button to stop playback at any time.

6.4.5 Erasing Voice Memos

Follow these steps to erase a voice memo that was previously added to a photo.

In Playback

mode, select a photo with a voice memo. You will see the Voice Memo

icon

in the top left corner of the LCD screen.

Tap the Menu

icon.

Tap the Voice Memo

icon. The Record Voice Memo screen appears.

Tap the Erase Voice Memo

icon to erase the voice memo for the photo.

Tap Yes or to erase the voice memo, or tap No to cancel.

Note

•

A photo can have only one voice memo. If you record a voice memo for a photo with an
existing voice memo, the previous voice memo will be erased.

DISP

0017/0019 11-05

1.0x

Voice

Memo

icon

DISP

Record Voice Memo

Play

Summary of Contents for DC E40





























































Search results

Summary of Contents for DC E40

Reviews:

Related manuals for DC E40

Brands by name

Popular brands

BenQ DC E40, User Manual

Search results

Summary of Contents for DC E40

Reviews:

Related manuals for DC E40

Brands by name

Popular brands