SYSTEM INSTALLATION MANUAL
89000016
(b)
The display screen is as shown in Figure 3067.
Figure 3067. (Sheet 1 of 1) Aircraft Width Display
(21) GPS Reference Position Offset
(a)
There are three modes by which the GPS reference offset can be set:
• Unknown
• Auto Set by GPS
• Manual Set Here.
(b)
The display screen is as shown in Figure 3068 with one of the options from above.
(c)
Rotate the CODE knob either clockwise or counterclockwise to display the options above
and select the correct GPS reference offset. Once selected, press the ENT key to confirm
your selection. If “Unknown” or “Auto Set by GPS” is selected the next configuration
item in the configuration mode will be displayed. If “Manual Set here” is selected then
options for manually entering the GPS antenna reference offset are displayed as
shown in Figure 3069.
(d)
The antenna distance from the nose can be entered anywhere between 2 meters and 60
meters by rotating the CODE knob either clockwise or counterclockwise to display the
correct distance. Once selected, press the ENT key to confirm selection and move to the
lateral offset configuration item in the configuration mode.
(e)
The antenna lateral offset has the following options that can be selected:
• Unknown
• Left 0 to 2 meters
• Left 2 to 4 meters
• Left 4+ meters
• Central
• Right 0 to 2 meters
• Right 2 to 4 meters
• Right 4+ meters.
(f)
The display screen is as shown in Figure 3070 with one of the options from above.
(g)
Rotate the CODE knob either clockwise or counterclockwise to display the options above
and select the correct antenna offset. Once selected, press the ENT key to confirm
selection and move to the next configuration item in the configuration mode.
Figure 3068. (Sheet 1 of 1) GPS Reference Position Offset Display
EFFECTIVITY
ALL
Page 3053
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.