SYSTEM INSTALLATION MANUAL
89000016
Table 3002. ADS-B Transmit Configuration Settings (Cont)
Configuration Item
Default
Setting
Disable Squawk
Transmit
1
off
VFR Squawk Code
2
1200
NOTES:
1
Disable squawk transmit is not configurable on the KGX control panel.
2
VFR squawk code is only set on the KGX control panel.
Table 3003. Display Output Configuration Settings
Configuration Item
Default
Setting
Max Targets Output
max
Chelton CSA Enable
1
disable
Traffic Velocity Validation
2
enable
Display Data Output
3
traffic&fisb
NOTES:
1
Chelton CSA Enable is not configurable on the KGX control panel.
2
Traffic Velocity Validation is not configurable on the KGX control panel.
3
Display data output is not configurable on the KGX control panel.
(5)
Refer to Paragraph 4.F. for detailed information on determining the correct display output
settings in Table 3003.
C.
Serial and ARINC Port Configuration Details
(1)
General
(a)
The KGX installation requires data interfaces to other equipment for a complete aircraft
installation. The necessary data interfaces are as follows:
• Control input (transceiver only)
• TCAS input
• GPS input
• GPS predictive RAIM input
• Altitude input
• Display output
• GPS output.
EFFECTIVITY
ALL
Page 3007
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.