SYSTEM INSTALLATION MANUAL
89000016
(b)
The display screen is as shown in Figure 3053 with one of the options from above.
(c)
Rotate the CODE knob either clockwise or counterclockwise to display the options above
and select the correct aircraft category. Once selected, press the ENT key to confirm your
selection and move to the next configuration item in the configuration mode.
Figure 3053. (Sheet 1 of 1) Aircraft (Emitter) Category Display
(7)
Squat Switch Type
(a)
The following options are offered for selecting aircraft squat switch type:
• Not connected
• Low when ground
• Low when airborne.
(b)
The display screen is as shown in Figure 3054 with one of the options from above.
(c)
Rotate the CODE knob either clockwise or counterclockwise to display the options above
and select the correct squat switch type. Once selected, press the ENT key to confirm
your selection and move to the next configuration item in the configuration mode.
Figure 3054. (Sheet 1 of 1) Squat Switch Type Display
(8)
Serial IN Channel X Data Type
NOTE:
X = Channel number.
(a)
The KGX can receive data through five serial channels. The following options are offered
for selecting serial input type for each individual input serial channel of the KGX:
1
Channel 1:
NOTE:
Refer to the GENERAL INFORMATION section for details on selecting
serial input settings.
• Not used
• GPS-FreeFlight
• GPS-GNS ADS-B
• GPS internal.
2
Channel 2:
• Not used
• GPS-FreeFlight
• GPS-GNS ADS-B
EFFECTIVITY
ALL
Page 3045
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.