SYSTEM INSTALLATION MANUAL
89000016
Figure 3062. (Sheet 1 of 1) ARINC OUT Chan 1 Interface Speed Display
(16) Select MAX Targets Output
(a)
This option controls the maximum number of targets which will be sent out the serial or
ARINC 429 channels when traffic output has been configured. There are 24 total options
offered for selecting MAX targets. These include:
• Integers 8 thru 30
• MAX.
(b)
The display screen is as shown in Figure 3063 with one of the options from above.
(c)
Rotate the CODE knob either clockwise or counterclockwise to display the options above
and select the correct number of targets. Once selected, press the ENT key to confirm
your selection and move to the next configuration item in the configuration mode.
Figure 3063. (Sheet 1 of 1) Select MAX Targets Output Display
(17) GPS Certification
(a)
The KGX requires a valid GPS source so that aircraft position can be transmitted in its
ADS-B message. The GPS source is usually certified to a RTCA DO178B software level
as mandated by the governing FAA TSO. The following GPS software certification
levels can be selected:
• Uncertified
• Level B
• Level C
• Level D.
(b)
The display screen is as shown in Figure 3064 with one of the options from Step (a).
NOTE:
For external position sources, contact the manufacturer to obtain the relevant
data.
(c)
Rotate the CODE knob either clockwise or counterclockwise to display the options above
and select the correct GPS certification level. Once selected, press the ENT key to
confirm your selection and move to the next configuration item in the configuration mode.
EFFECTIVITY
ALL
Page 3051
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.